CPS 2500 trigger
CPS 2500 trigger
Ok so the trigger on my 2500 has finally broke. I think I can fix it it's not completely snapped but when I tried to remove the trigger wire so I could take it to school and fix it, the wire snapped off in the hole where it goes in the trigger. help?
super soaker cps 2000......SUPER SOAKER CPS 2000!!!!!!!!!1!!!1!!one
Re: CPS 2500 trigger
You mean the wire broke the hole that it normally sits in? Or the wire itself broke? You can fix the former by drilling a new hole (might have to attach something as support like epoxy putty and drill through it). If the wire is too short for the new location or won't bend into the right shape for it, you can use coat hanger wire.
marauder wrote:You have to explain things in terms that kids will understand, like videogames^ That's how I got Sam to stop using piston pumpers
Re: CPS 2500 trigger
No the wire broke
super soaker cps 2000......SUPER SOAKER CPS 2000!!!!!!!!!1!!!1!!one
Re: CPS 2500 trigger
Try cutting up and bending a coat hanger wire. I've done it on a 2500 before. It will take some patience to get it into the right shape, and it won't make those tight turns like the stock wire. I simply looped it through the trigger hole rather than try all those perfect 90 degree turns.
marauder wrote:You have to explain things in terms that kids will understand, like videogames^ That's how I got Sam to stop using piston pumpers
Re: CPS 2500 trigger
Usually the plastic parts break first, so I got a bit confused. However, a broken wire makes sense considering how easily they rust. Anyway, use pliers and take your time. The wire you're using may be too weak to handle bends well, however; if that's the case, loop around the holes like Duxburian mentioned.
Re: CPS 2500 trigger
Ok how long should the new wire be?
super soaker cps 2000......SUPER SOAKER CPS 2000!!!!!!!!!1!!!1!!one
-
- Posts: 3975
- Joined: Tue Jul 20, 2004 9:29 pm
- Location: Charleston
- WWN League Team: Havoc
- Contact:
Re: CPS 2500 trigger
So what's the best kind of wire you can use to replace the stock part? Obviously something rust proof or rust resistant. I guess that would be brass or stainless steel. I think brass would be better cuz it's more maleable.
https://hydrowar.wordpress.com/
SEAL wrote:If you ain't bloody and muddy by the end of the day, you went to a Nerf war.
Re: CPS 2500 trigger
Ok it's fine now. I bent the wire back into shape and installed it. Everything is fine now.
super soaker cps 2000......SUPER SOAKER CPS 2000!!!!!!!!!1!!!1!!one
- supersoakerman
- Posts: 21
- Joined: Fri Apr 26, 2013 12:03 am
Re: CPS 2500 trigger
just use a paper clip, thats what I used to fix my CPS 1000
I've come to kick ass and drink milk, and i've finished my milk
Re: CPS 2500 trigger
not to be rude but dude. have you ever seen the inside of a CPS 2500? the trigger wire is almolst a foot long! Anyways its fixed now so yeah.
super soaker cps 2000......SUPER SOAKER CPS 2000!!!!!!!!!1!!!1!!one
Re: CPS 2500 trigger
Good that you fixed it. Same thing happened to me with my 2000. fixed it with a coat-hanger and pliers!
"The world is yours" - Nas
Who is online
Users browsing this forum: No registered users and 20 guests