For questions, articles, and discussions regarding water blaster modifications.
-
Soakologist
- Posts: 1005
- Joined: Sun Jul 04, 2004 4:23 pm
- Location: Indianapolis (North Side)
-
Contact:
Post
by Soakologist » Mon Jul 26, 2004 7:56 pm
I had a CPS 1700 with a broken nozzle and a CPS 1500 without a PC, trigger, and several other defective parts.
I saw a possibility. >:-}
I took both guns apart and scanned out the situation. I decided to go with the CPS 1500's body shell because it was in better condition (and because I prefer gray). I replaced the Trigger, PC, and Backside of the white nozzle-predicate. I had to unscrew both guns' nozzle predicates and make slight saw incisions into them to loosen the rather tight epoxy on it. I then screwed both of the effective predicate parts together and discarded the defective parts. I then unscrewed the 1700 PC and K-Modded it with some leftover Balloons. I then refastened the gun together and drilled out a slightly larger nozzle (The Cap and Selector for both 1500 and 1700 were lost long ago).
The Transplants were a success!
The CPS 15,700, a truly unique gun, now shoots a ~15x shot about 55'. I couldn't be prouder!
Pics coming soon...
Edited By Soakologist on 1090889820
-
Storm
- Posts: 61
- Joined: Sat Jul 10, 2004 10:10 am
- Location: Gaspe
Post
by Storm » Tue Jul 27, 2004 10:29 am
Sounds awesome. I can't wait for pictures 
-
blueviper42
- Posts: 75
- Joined: Sat Jul 10, 2004 4:29 pm
- Location: USA
Post
by blueviper42 » Tue Jul 27, 2004 9:46 pm
that sounds really cool
and oh my gosh, you are so clever! we should have ALWAYS used commas!
-
Veteran
- Posts: 569
- Joined: Sun Jul 04, 2004 4:08 pm
- Location: Redmond, WA
Post
by Veteran » Tue Jul 27, 2004 10:57 pm
That was bordering on spamming/trolling. Anyway...
I think its a great idea, I wonder if you could stick the nozzle selector from a broken 4100 on a 310?
-
Falcon
- Posts: 148
- Joined: Wed Jul 07, 2004 2:40 am
- Location: Sydney, Australia
Post
by Falcon » Wed Jul 28, 2004 5:00 am
Veteran wrote:I think its a great idea, I wonder if you could stick the nozzle selector from a broken 4100 on a 310?
It wouldn't fit. You could probably make it fit with a lot of work, but it wouldn't be worth it, because there is no way that the XP 310's PCs could support an 8.5x nozzle.
-
Soakologist
- Posts: 1005
- Joined: Sun Jul 04, 2004 4:23 pm
- Location: Indianapolis (North Side)
-
Contact:
Post
by Soakologist » Wed Jul 28, 2004 11:44 pm
I put commas just to make sure that no one thought that it was a typo (the two zeros, I mean).
-
RecklessAssault
- Posts: 10
- Joined: Mon Jul 26, 2004 7:36 pm
- Location: Nebraska USA
-
Contact:
Post
by RecklessAssault » Thu Jul 29, 2004 3:14 pm
Make that two success stories... I also replaced my 1500's old internals (check valve frozen, but I have had no luck getting the 1500 internals to work properly) with those of the 1700 because the 1700 I bought from a friend had a very beaten-up case (there were several large holes in it from where he had to work on the trigger mechanism) and the pump handle was broken off. I used the internals only and used the 50 balloon K-modded PC/reservoir tank from the 1500 since they were in better shape as well.
With the addition of a KingSoaker 21000 I will have two K-modded soakers. Can't wait to see how that one performs.
Aaron
I was angry with my friend;
I told my wrath my wrath did end.
I was angry with my foe;
I told it not my wrath did grow.
-William Blake, "A Poison Tree"
Users browsing this forum: No registered users and 1 guest