CPS 1000 won't fire, any help appreciated ! - Please help !

For questions, articles, and discussions regarding water blaster modifications.
Post Reply
H20wned
Posts: 28
Joined: Sun Aug 06, 2006 9:39 am
Location: Hampton

Post by H20wned » Sun Jun 24, 2007 7:29 am

Hey guys,

I'm not too sure if I've posted this before but oh well.
I was getting rid of all my Nerf guns when I found my CPS 1000(It's the only CPS gun I have). When I pumped it, I could hear the air escaping so I'm guessing a valve is stuck open or something. The problem is, the big orange cover on the barrel is glued on, and its so old and brittle, when I try to pry it off, I fear it will snap. Any suggestions about how to dissolve the glue or whatever are much appreciated.

I just really really really want it to fire again.
:bm1000:

Silence
Posts: 339
Joined: Sat Apr 21, 2007 3:01 pm
Location: Virginia

Post by Silence » Sun Jun 24, 2007 8:33 am

First make sure you need to take it off in order to open the gun - sounds like you already have though. Also, have you tried unscrewing it? I'm sure people with CPS 1000s might have some advice.

When you have the water gun open, fill it with water and pump. If there's a leak, you'll see a thin stream of water coming from somewhere. Epoxy the hole up.

HBWW
Posts: 4110
Joined: Tue Jul 11, 2006 7:12 pm
Location: MI
WWN League Team: Havoc

Post by HBWW » Sun Jun 24, 2007 9:47 am

My nozzle cap simply snaps off. Just keep pulling and prying at it and it should come off fairly easily. (However, mine doesn't unscrew) Unfortunately, some mk's of the 1000 have nozzle caps that are glued, but see if yours isn't first. If it is, you'll probably have to use brute force to get the thing apart. Use a flathead screwdriver for prying in most cases.

I'm assuming it's a trigger problem right now. To take care of this, stretch some rubber bands so it keeps the pin down (the pin near the nozzle), but make sure they don't get in the way of anything else. If you need more, use more or stronger, larger bands. When you're done, quickly put it together and do some testing. Make sure you can comfortably and easily do rapid tap shots with it.
HydroBrawl Water Warfare

Discord: m0useCat

User avatar
rbertaut44
Posts: 15
Joined: Tue Jun 19, 2007 7:26 pm
Location: Maryland

Post by rbertaut44 » Wed Aug 01, 2007 3:06 pm

The front part might be glued, I know it is on the flash fload.
Normal Pasition: Camander/Hevy Forword
Main Gun: CPS 3200| Backup Gun: Aquashock Seckrit Strike
Arsonal: CPS 3200, 100 oz Aqua Pack, Max D 2000, Water Ball SL 175 and ML 100, Sheald Blaster 1000 and 3000, Aquashock Seckrit Strike, Healix, and Storm 2 in1.

Broken guns: A lot

hydroblitz
Posts: 211
Joined: Sat Mar 31, 2007 9:03 pm
Location: Canada
Contact:

Post by hydroblitz » Wed Aug 01, 2007 3:10 pm

I don't have one, but usually when I mod Nerf Guns, I use a flathead to pry things open.
Soak On!

User avatar
rbertaut44
Posts: 15
Joined: Tue Jun 19, 2007 7:26 pm
Location: Maryland

Post by rbertaut44 » Wed Aug 01, 2007 8:09 pm

Pry it open! wouldn't that brake it?!?
Normal Pasition: Camander/Hevy Forword
Main Gun: CPS 3200| Backup Gun: Aquashock Seckrit Strike
Arsonal: CPS 3200, 100 oz Aqua Pack, Max D 2000, Water Ball SL 175 and ML 100, Sheald Blaster 1000 and 3000, Aquashock Seckrit Strike, Healix, and Storm 2 in1.

Broken guns: A lot

Crashdummy
Posts: 338
Joined: Thu Aug 26, 2004 12:25 am
Location: Alameda, California
Contact:

Post by Crashdummy » Thu Aug 02, 2007 2:33 pm

Work a flat head in the edges, the front part just pops on and off. I was afraid of breaking mine, but it just popped off. Just don't force it, or it might break. :cool:

HBWW
Posts: 4110
Joined: Tue Jul 11, 2006 7:12 pm
Location: MI
WWN League Team: Havoc

Post by HBWW » Thu Aug 02, 2007 6:36 pm

rbertaut44 wrote:The front part might be glued, I know it is on the flash fload.
The only thing glued on the FF is the pump cap. Both nozzle caps are secured by 2 seperate pieces that are screwed together, and those screws must be taken off. (unless one happens to open up just enough to get the whole piece out, but it's very hard to do.)

Anyways, like I said, my 1000's cap snaps off easily, but that may just be because of it's version. (different versions might have the cap glued on) Just pull on it and try it around.
HydroBrawl Water Warfare

Discord: m0useCat

WaterWolf
Posts: 448
Joined: Sat Jul 08, 2006 5:13 pm
Location: Central Vermont.

Post by WaterWolf » Thu Aug 23, 2007 6:43 am

Huh, with my CPS 1k, the nozzle piece just slid off with a little bit of prying.
No glue was visible underneath.
The Maple-Mountain-Marines.

Terrifying, but oddly refreshing.
-B.D.

Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests