Any Mods for the Flash Flood? - I need one.
- overload09
- Posts: 21
- Joined: Tue Apr 18, 2006 4:26 pm
- Location: Georgia
- overload09
- Posts: 21
- Joined: Tue Apr 18, 2006 4:26 pm
- Location: Georgia
Hmm! Tempting. That might just make me consider taking a knife to my Flash Flood. That could end up being my first modification to a perfectly full-functioning soaker!
Nintendo: Ha, we have Sonic!
Microsoft: Yeah, but we got Rare.
Nintendo: .................................................................****!!
Microsoft: Yeah, but we got Rare.
Nintendo: .................................................................****!!
What you hear is very silly. That was because the check valve was orange, so someone thought that Super Soaker had labeled it for us to hack off. Then they (don't know who) thought that since they wanted us to hack our guns up, they must have made the rest of the gun "easy to mod" too! The truth is, it's no easier to do a CVF on an orange check valve, and it's no easier to mod than any other blaster I've run across.
There is a thread in which I have posted that has two possible mods (if you count PVC and a hacksaw household materials)
Here it is:
Modable Guns?
Here it is:
Modable Guns?
- dragonclass
- Posts: 130
- Joined: Thu Jun 02, 2005 9:25 am
- Location: NAVSTA Everett/Marysville WA
How hard is it too remove the debris screen? It come out fully, right? I've already bored the standard nozzle(now a ~3x after using 1/8" bit). These mods will also be done to my Sharper Image MI FF when I get it. Thanks, Brad
Edited By dragonclass on 1148490586
Edited By dragonclass on 1148490586
Brad Beaty
Engineman 1st class(ret)
US Naval Expeditionary Command(NECC)
Don't think outside the box...There Is No Box
Engineman 1st class(ret)
US Naval Expeditionary Command(NECC)
Don't think outside the box...There Is No Box
- Speedbeetle06
- Posts: 88
- Joined: Wed Apr 12, 2006 5:54 pm
- Location: Kilmarnock Virginia
- Contact:
The screen on mine came off with a little trouble, but nothing to get worked up over.
Another great mod is the addition of a strap. Get a sholace and tie one end around the PC and the other end through the little hole where the trigger is(you'll have to tie it around the front of the PC to do this) This is an Extremely useful mod, as it can allow you to carry back up with your Flash Flood(if you use the riot blast a few times you'll need it)and pretty much works with all guns.
Edited By Speedbeetle06 on 1148879696
Another great mod is the addition of a strap. Get a sholace and tie one end around the PC and the other end through the little hole where the trigger is(you'll have to tie it around the front of the PC to do this) This is an Extremely useful mod, as it can allow you to carry back up with your Flash Flood(if you use the riot blast a few times you'll need it)and pretty much works with all guns.
Edited By Speedbeetle06 on 1148879696
-
- Posts: 5
- Joined: Mon Jun 05, 2006 2:30 pm
- Location: Montreal, Canada
- dragonclass
- Posts: 130
- Joined: Thu Jun 02, 2005 9:25 am
- Location: NAVSTA Everett/Marysville WA
I finally drilled/ripped the debris screen(not too hard when you have a good set of twisers), burst is now alittle tighter. Then, I went ahead and bored the main nozzle one more size(1/8" bit)...which it took to very well.
Edited By dragonclass on 1149902226
Edited By dragonclass on 1149902226
Brad Beaty
Engineman 1st class(ret)
US Naval Expeditionary Command(NECC)
Don't think outside the box...There Is No Box
Engineman 1st class(ret)
US Naval Expeditionary Command(NECC)
Don't think outside the box...There Is No Box
-
- Posts: 252
- Joined: Mon Apr 10, 2006 11:26 pm
- Location: Santa Cruz, CA
- Contact:
You could do a pc wall expansion, but you might need water-proof tape. A pc expansion GREATLY increases shot time, and its cool cause you get to see the pc getting bigger and bigger...
But you should be carefull not to pump it too much, when I did that the pc shot of the gun and exploded water everywhere! When urbanfighter7 did this mod he had to dis-able the riot blast butthere might be a way to work around this.
But you should be carefull not to pump it too much, when I did that the pc shot of the gun and exploded water everywhere! When urbanfighter7 did this mod he had to dis-able the riot blast butthere might be a way to work around this.
If you would like to join the Superior Water Attack Team please pm me.
The soaker chooses the user, Harry Potter...
The soaker chooses the user, Harry Potter...
- urbanfighter7
- Posts: 82
- Joined: Sun May 21, 2006 3:35 pm
- Location: Santa Cruz CA.
- Contact:
Who is online
Users browsing this forum: No registered users and 35 guests