Page 1 of 1
Posted: Tue Feb 20, 2007 4:59 pm
by bill
Does anyone know if you can plug the 50 oz AQUAPACK into the 100 oz AQUAPACK's quick fill cap??
That way I can have 251 oz of water for my HydroBlitz and look really cool while doing it. Front and back packs baby.
Edited By bill on 1172008815
Posted: Tue Feb 20, 2007 5:02 pm
by isoaker
From what I know, the caps on the AquaPacks don't accept the hose attachment from another AquaPack. Would've been nice if they did, though the water may not quite flow properly if you start connecting a bunch of AquaPacks in series.
BTW, welcome to the forums!
Posted: Tue Feb 20, 2007 11:14 pm
by Crashdummy
Good luck getting water to flow backpack to backpack, gravity won't be on your side. :p
Posted: Wed Feb 21, 2007 9:43 am
by bill
If you get it just right you should be able to get a siphon going. but if you cant connect packs then that would be useless. Remember 200 oz is like 1.5625 gallons and 250 oz is 1.953125 Gallons thats not bad. Or 5.92 and 7.4 liters respectively. You can always squeeze the 50 oz pack to push water into the 100 oz back.
Thanks for the welcome isoaker
Edited By bill on 1172077794
Posted: Thu Feb 22, 2007 8:15 pm
by Croc
I'm sorry to say this, but unless you intend to modify one of the packs, it will not work (sorry for flaming - I will explain)
-As iSoaker said, the cap on the 100 oz. is the old quick fill cap, and the cap on the 50 oz. pack is kind of weird, since it is not a cap, more of a plug.
Sorry to ruin your dram of doing that though, would have been nice if it worked
Posted: Thu Feb 22, 2007 8:36 pm
by forestfighter7
You could always mod the soaker to have multiple backpacks... Or just one really big backpack. Welcome to the forums!
Posted: Thu Feb 22, 2007 9:41 pm
by Rook
Perhaps you could take the tubing and the piece that attaches to the gun, and replace the backpack piece with this.
This will greatly increase your capacity, while still maintaining the usefulness of the Max Infusion backpack.