Page 1 of 1

UNIQUE HOSE and PRESSURE filled WATER GUN

Posted: Sat Dec 13, 2008 3:30 pm
by intstydrvn
About 5 years ago I bought for water guns from my nieces and nephews. They were really different in that you used the a special fitting on the hose that layed flat on the ground to fill the water gun you didnt have to pump or anything when you filled the gun you pushed it down on this fitting and it willed with pressure and water any ideas who made this and are they still available?

thanks
Jamie

Re: UNIQUE HOSE and PRESSURE filled WATER GUN

Posted: Sat Dec 13, 2008 7:04 pm
by Sun
I think your talking about either the speedloaders or the quickfill Super Soakers. None are on the market, but you might be able to find one online.

Re: UNIQUE HOSE and PRESSURE filled WATER GUN

Posted: Sat Dec 13, 2008 11:39 pm
by HBWW
The quickfill devices can usually be built with PVC. Earlier, I wrote up a hose system I created on Super Soaker Central. http://www.sscentral.org/homemade/vhs.html This allows the user to quickly switch between shooting and filling functions, but even the mk II design is a little... sketchy... I currently don't have the resources to fix some of the issues so I'd recommend using some sort of hose extension that'll fit inside a blaster's reservoir for standard filling. Another issue is that filling Super Charger blasters requires careful handing from the pressure, or the person filling could get soaked.

Aside from that, you can search eBay for Super Charger blasters that come with the charger. (The charger seldom comes alone) Sometimes it might be worth it, sometimes not.