Posted: Fri Jun 02, 2006 5:28 pm
So, I denozzled my blazer. And it still shot about 30 feet. The spread was about a foot and a half at the end of the blast.
Page 1 of 1
Posted: Fri Jun 02, 2006 9:44 pm
kinda a waste don't ya think
Posted: Fri Jun 02, 2006 10:01 pm
So, I denozzled my blazer. And it still shot about 30 feet. The spread was about a foot and a half at the end of the blast.
Thats cool, do you know what the nozzle is rated?
kinda a waste don't ya think
How was it a waste? If its like most guns with nozzle selectors, you should be able to just screw it right back on.
Posted: Sat Jun 03, 2006 5:47 am
Good idea, might try that.
Posted: Sat Jun 03, 2006 10:46 am
The Blazer lacks the punch of CPS and air pressure guns. The Blazer's stream can go about fifty feat, But by the the stream is traveling at a much slower speed the when it left the barrel.overload09 wrote:So, I denozzled my blazer. And it still shot about 30 feet. The spread was about a foot and a half at the end of the blast.
Thus, I highly doubt that it could be used as anything really practical.
Posted: Sat Jun 03, 2006 10:53 am
I just denozzled mine, but it's not that good.
It's just like the large nozzle on the nozzle selector.
It's just like the large nozzle on the nozzle selector.
Posted: Sun Jun 04, 2006 12:45 pm
I've noticed that with WW guns, the largest nozzle is the size of the largest nozzle that you can select, and it doesn't go quite as far. I did that with my Hydra Pak, but then put the nozzles back on, because it sucked.
Posted: Wed Jun 14, 2006 9:13 am
how'd you get it off in the first place i can't seem to find the right srew driver:( 
Edited By kylemw9 on 1150294445
Edited By kylemw9 on 1150294445
Posted: Sat Jul 22, 2006 3:42 pm
I have a screwdriver that fits in the screw. When I turn the screwdriver, the screw comes out. But, only if I turn it in one direction. That direction is normally counter-clockwise, and the screwdriver that you need is Phillips. The range on the high nozzle of my former Aqua Pack was more than it was de-nozzled.