Page 1 of 1
Posted: Mon May 30, 2005 12:21 pm
by Soakerboy0109
Does any one know if you can check valve freeze the new STE Flash Flood? Also, does any one know any power mods for the FF that will increase the range or output of the FF? Thanx for all of your help!!!!!
Posted: Mon May 30, 2005 1:32 pm
by Spinner
Of course you can check valve freeze the FF: it's even made of a different colour plastic, if I remember correctly.
As for increasing power and output, the most obvious mod is of course Collosus!
Posted: Mon May 30, 2005 2:53 pm
by SSCBen
Posted: Mon May 30, 2005 4:35 pm
by Soakerboy0109
Thanks, know do you know if it is easy to get the Flash flood open with out any sawing or breaking? also, have you tried to CVF the Flassh Flood with the piping still attached or do you have to remove the piping and if so, how do you do that easily? Also, in the article that you wrote about possible modifications, you said something about removing the pump cap and sawing working well. Now could you explain what the silent trigger mod is, how to do it, and what it does? On the last link, can you do that mod to a FF or just certain guns? Thanks for all of your help!
Posted: Mon May 30, 2005 6:53 pm
by SSCBen
I have never opened a Flash Flood, and therefore I can not tell you how easy it is to open. However, I do believe I explained the procedure Hunter went through to open his Flash Flood in the TechLog entry I linked to.
Please read my Check valve freezing article for information on how to perform the actual check valve freeze.
Hunter made that silent trigger modification. I would read that thread for more information on it. The name is self explanatory by the way.
As for the last link, which is another pictoral guide to the Collosus modification, you can do that to all water guns with cylindrical pressure chambers. I would not post modifications that you could not do in a thread requesting mods for a certain water gun because that wouldn't make sense.
Posted: Mon May 30, 2005 9:16 pm
by hunter
you have to do the pump cap removal, which involves sawing it or breaking it.
I CVFed my FF, i dont know what trthe bigdeal is, its not a hard mod you know.
Edited By hunter on 1117506352
Posted: Tue May 31, 2005 10:43 am
by Dacca
i got bored and added a strap, i'll post a pic once i find a camera
Posted: Sun Jun 05, 2005 5:49 pm
by supersoaker
can someone give me the link to how to increase your FF's capacity by using a pop bottle?
Posted: Mon Jun 06, 2005 7:57 am
by isoaker
supersoaker wrote:can someone give me the link to how to increase your FF's capacity by using a pop bottle?
This thread has some info on a couple of things another member did with his Flash Flood.
Posted: Mon Jun 06, 2005 4:46 pm
by supersoaker
thanks! I think I'm going to try it!
Posted: Sat Jul 23, 2005 8:05 pm
by Lt.Winters
Umm..How would I saw the pump cap? if I don't get through that then I can't mod it or fix that trigger problem!!!!!Pictures will be nice thank you.
Posted: Sat Jul 23, 2005 8:19 pm
by isoaker
In the Flash Flood Trigger thread, you'll find a pic of an opened Flash Flood as well as my reply to your pump-cap problem.