Page 1 of 1

Posted: Fri Apr 22, 2005 12:09 pm
by rinkydinkysplat
cause i JUST bought an xp-310 new from sports authority and i looked at the shotgun mod article at sscentral.
to me it seems to go like this:
-unscrew little screw
-take out bottom part
-put back on

is it possible to put the bottom part back on and just screw it back on?

Posted: Fri Apr 22, 2005 12:20 pm
by isoaker
Haven't tried it, personally, but from the pics, it should be possible to re-attach the nozzle-selector with or without the external housing. However, pics aren't quite clear enough for me to be 100% sure and I don't personally plan on popping my XP310's nozzle cap to verify.

I think that article is one of Doom's earlier mod thoughts since I believe he could/would be a lot more creative with a nozzle mod now.


Posted: Fri Apr 22, 2005 3:22 pm
by rinkydinkysplat
im going to try it and put it back

Posted: Sat Apr 23, 2005 11:58 am
by Forceuser
It's not permanent, I know because my friend removed and replaced it to camo paint his.

Posted: Sat Apr 23, 2005 4:17 pm
by rinkydinkysplat
i did it its not permanent

Posted: Sat Apr 23, 2005 4:59 pm
by isoaker
Good to know!

I figure, if you want to do a better mod (but a permanent one), I'd pick one of the middle-sized nozzle plug parts and just carefully break it off, then re-attach the rest so you can still have different-sized nozzles plus one shot-gun blast.


Posted: Sat Apr 23, 2005 8:15 pm
by rinkydinkysplat
ohh nice idea! i just dont want to break my not-even-3-days-old xp310 or damage it at all so i dont think i will try it

Posted: Sat Apr 23, 2005 9:10 pm
by Adrian
You can't break your gun by removing the nozzle selector. I've done it many times, and unless you lose the pieces, it's totally harmless.