Mini SCII?

Guides and discussions about building water blasters and other water warfare devices such as water balloon launchers.
User avatar
SEAL
Posts: 2527
Joined: Thu Apr 29, 2010 11:37 am
Location: Charlotte, NC
WWN League Team: Catskill Mountain SEALs
Contact:

Re: Mini SCII?

Post by SEAL » Sat Jan 12, 2013 6:03 pm

Not sure what you mean, but the reason you pour water into the nozzle is to load the cannon, because they don't have reservoir caps or anything (caps would be a weak point). Once you have a sufficent amount of water in the reservoir, you pressurize it with a bike pump, which only pumps in air.
~Hotel Oscar Golf~

We'll be back...

adronl
Posts: 5
Joined: Tue Jan 08, 2013 4:33 pm

Re: Mini SCII?

Post by adronl » Wed Jan 16, 2013 3:38 pm

atvan wrote:Are you the adonl for SSC?

If so, welcome back, and where have you been. We're still wating for SCIII.
Yes this is the adronl and by SCIII I assume that you mean the 6" cannon I built. Well I never posted any video because well the bigger you make the cannons the lower the pressure rating on the pvc and it is far more expensive also took some help firing it. We did do some high pressure fires but really doesnt beat the range of the SCII and costs a lot more. Does have a retarded sized shot though. I really like just using 3 or 4" pvc great pressure rating and cheap and easy to find. I stopped caring for the piston cups as they wear out and you get leakage.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest