Semi homemade CPS with pieces from a XSHOT blaster

Guides and discussions about building water blasters and other water warfare devices such as water balloon launchers.
User avatar
Zman
Posts: 66
Joined: Wed May 18, 2022 10:22 am
Location: Anderson Missouri

Re: Semi homemade CPS with pieces from a XSHOT blaster

Post by Zman » Fri Jun 09, 2023 8:51 pm

SSCBen wrote:
Fri Jun 09, 2023 8:47 pm
You haven't provided any information about your LRT, so it's hard for me to say. The required pressure depends on the tube. All I can say is that you need more.
it is the same as the LRT in your superCPH guide
Just because you have a super soaker CPS 2000 doesn’t mean you’re undefeatable :cps2000:

SSCBen
Posts: 1617
Joined: Sun Jul 04, 2004 4:15 pm
Contact:

Re: Semi homemade CPS with pieces from a XSHOT blaster

Post by SSCBen » Fri Jun 09, 2023 9:01 pm

You should need at least 40 psi as I recall, perhaps more. Not all home water systems will be able to reach that pressure. You can buy a pressure gauge to test your water pressure.

User avatar
Zman
Posts: 66
Joined: Wed May 18, 2022 10:22 am
Location: Anderson Missouri

Re: Semi homemade CPS with pieces from a XSHOT blaster

Post by Zman » Fri Jun 09, 2023 9:06 pm

SSCBen wrote:
Fri Jun 09, 2023 9:01 pm
You should need at least 40 psi as I recall, perhaps more. Not all home water systems will be able to reach that pressure. You can buy a pressure gauge to test your water pressure.
any way to increase the pressure of the home water system
Just because you have a super soaker CPS 2000 doesn’t mean you’re undefeatable :cps2000:

SSCBen
Posts: 1617
Joined: Sun Jul 04, 2004 4:15 pm
Contact:

Re: Semi homemade CPS with pieces from a XSHOT blaster

Post by SSCBen » Sat Jun 10, 2023 7:19 am

Probably, but I don't know much about that. You should look into making a pump for your homemade blaster.

User avatar
Zman
Posts: 66
Joined: Wed May 18, 2022 10:22 am
Location: Anderson Missouri

Re: Semi homemade CPS with pieces from a XSHOT blaster

Post by Zman » Sat May 04, 2024 11:04 am

After a lot prototypes I realized that trying to fit it all into the xshot Is not the best idea I am currently looking at using plastic or carbon fiber rod/Channels as the skeleton I will be looking into options for the outer shell next i will be looking at more blaster before abandoning the idea though. Using Reservoirs and pumps from off the shelf blasters still seems the right choice.I plan to wrap up this by the end of the summer. Until next time soak on!
Just because you have a super soaker CPS 2000 doesn’t mean you’re undefeatable :cps2000:

Post Reply

Who is online

Users browsing this forum: No registered users and 32 guests