CPH Progress = Ongoing

Guides and discussions about building water blasters and other water warfare devices such as water balloon launchers.
Post Reply
mr. dude
Posts: 588
Joined: Fri Mar 03, 2006 8:03 pm

CPH Progress = Ongoing

Post by mr. dude » Mon Apr 06, 2020 5:39 pm

Here's a CPH I started building in 2008. I got it working in 2011 or 2012. Last week, I needed to do some maintenance on the pump because the seal had broken, but I decided to address a major design flaw as well.
Image
Basically there was a lot of dead space between the reservoir and pump. I'm trying to remember my justification for why I designed it like that, I know in the original topic I said I wanted the pump handle in line with the ball valve. The net result was that it would take a good 150 pumps just to 'prime' the thing so all the dead space has water in it and the pump can actually draw water from the reservoir.

Image

Much less horrible to pump now.

Tim
Posts: 122
Joined: Wed May 11, 2016 4:05 pm

Re: CPH Progress = Ongoing

Post by Tim » Sun Apr 26, 2020 4:36 pm

Cool. Thanks for sharing.

I couldn't get your link to the old forum to work, but I was able to view at the following link...

https://web.archive.org/web/20130403195 ... php?t=6552

EDIT: SSC forums were down. Ben corrected the issue. Your link now works.

Tim

mr. dude
Posts: 588
Joined: Fri Mar 03, 2006 8:03 pm

Re: CPH Progress = Ongoing

Post by mr. dude » Mon May 04, 2020 2:42 am

I realized I've abandoned this for a month. Basically, I tried it out, pump worked great but the the PC was leaking badly. Then the hose barb and end cap shot off the PC and I haven't gotten around to putting them together. It was quite deflating.

I've been... busy...

Discovering new video games to binge...

Anyway, I'll get to it soon.

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests