Trigger Repair

For questions, articles and discussions regarding water blaster maintenance and repairs.
Post Reply
HBWW
Posts: 4102
Joined: Tue Jul 11, 2006 7:12 pm
Location: MI
WWN League Team: Havoc

Trigger Repair

Post by HBWW » Thu Jun 23, 2016 10:36 pm

There aren't many decent resources for this common issue, so here's one.

Tools/Materials: Small cutters, metal plating, epoxy.

Procedure: Measure out the metal plating you need to cut to get good coverage on the part. Cut this out twice. Use the two pieces, one on each side. Do not use only a single strip on the bottom of the trigger, this will not hold. Remember, more surface area is better.

Use epoxy to connect the metal strips to the trigger pieces. Devcon Plastic Welder is good.

You may need to sand/dremel/file down portions of the trigger and/or shell in order for this repair to fit. Test frequently by assembling the shell and trigger.

Image

Image

Image

Image

Image
HydroBrawl Water Warfare

Formerly CA99

Discord: g0dSamnit#4723

User avatar
SEAL
Posts: 2496
Joined: Thu Apr 29, 2010 11:37 am
Location: Charlotte, NC
WWN League Team: Catskill Mountain SEALs
Contact:

Re: Trigger Repair

Post by SEAL » Fri Jun 24, 2016 5:31 pm

Good stuff. Here's how I did my 2700 trigger:
CPS2700TriggerRepair.JPG
CPS2700TriggerRepair.JPG (801.82 KiB) Viewed 1006 times
This was the third attempt, and despite being ugly, so far it's held quite well (I only pull on the metal part to be sure), however it seems I didn't file the casing down enough because it sometimes catches and gets stuck open. This played a big part in my team's loss in the CTF round at the last Frozen Fury.

I think this is the area where 3D printing will help the most. I will make that a project this fall.
~Hotel Oscar Golf~

We'll be back...

marauder
Posts: 3938
Joined: Tue Jul 20, 2004 9:29 pm
Location: Clayton, NC
WWN League Team: Havoc
Contact:

Re: Trigger Repair

Post by marauder » Mon Jun 27, 2016 9:32 am

This is great. Can I put this on Hydrowar and advertise on the main page (link to the forum)?
https://hydrowar.wordpress.com/
SEAL wrote:If you ain't bloody and muddy by the end of the day, you went to a Nerf war.

HBWW
Posts: 4102
Joined: Tue Jul 11, 2006 7:12 pm
Location: MI
WWN League Team: Havoc

Re: Trigger Repair

Post by HBWW » Mon Jul 04, 2016 11:20 pm

Go for it! I'll be linking to this for nerfers as well.
HydroBrawl Water Warfare

Formerly CA99

Discord: g0dSamnit#4723

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest