Super Soaker CPS 1200 Pump
Super Soaker CPS 1200 Pump
The pump on my cps 1200 is very jumpy and hard to pump. It occasionally just gets stuck and you have to jiggle it to fix it. It requires far more effort to pump then the cps 1000 and is very rough. Any repair tips?
Thanks!
Thanks!
Keep Soaking!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Re: Super Soaker CPS 1200 Pump
This happened to my MD3k. I speculate it just needs some good old grease. Silicon would probably be good, but I'm not sure if it is good for the rubber. Alternatively, you could get a new o-ring.
DX wrote:In the neanderthal days of K-modding, people would lop off the whole PRV
Beware the PurpleWell, not that much soakage.
Re: Super Soaker CPS 1200 Pump
I'll try grease I don't want to open it up though in less it breaks cause I really don't want to break it. Do you think wd 40 would be good?
Keep Soaking!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Re: Super Soaker CPS 1200 Pump
WD-40=BAD. Don't use it. I will degrade the rubber. You are going to have to open it. While you have it open, you could k-mod it. The first time opening a gun is the hardest. There will be some glue, some rust, and other fun things. Opening it again will be a breeze.
DX wrote:In the neanderthal days of K-modding, people would lop off the whole PRV
Beware the PurpleWell, not that much soakage.
Re: Super Soaker CPS 1200 Pump
What about silicone spray or Vaseline?
Keep Soaking!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Re: Super Soaker CPS 1200 Pump
Silicon spray would be good, but silicon grease would be best.
DX wrote:In the neanderthal days of K-modding, people would lop off the whole PRV
Beware the PurpleWell, not that much soakage.
Re: Super Soaker CPS 1200 Pump
me soak u: Believe me, grease the pump. I got a CPS 1200 in really bad condition and it had the exact same problem with the pump. Once I used silicon grease and took some gunk out of it, it started working amazingly. Once I greased it was easier to pump and it took less pumps.
Re: Super Soaker CPS 1200 Pump
how did you take the gunk out of it? also how should I apply it, just smear it on the shaft?
Keep Soaking!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Re: Super Soaker CPS 1200 Pump
Put the grease on the o-ring.
DX wrote:In the neanderthal days of K-modding, people would lop off the whole PRV
Beware the PurpleWell, not that much soakage.
Re: Super Soaker CPS 1200 Pump
And to get to the o-ring I just pop the pump cap off, right?
Keep Soaking!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
-
- Posts: 596
- Joined: Mon Jul 05, 2004 8:36 am
- Location: Connecticut
Re: Super Soaker CPS 1200 Pump
Yes, it's that easy!
Join the fight! Support water warfare in your area today!
Re: Super Soaker CPS 1200 Pump
Ok cool! Thanks guys!
Keep Soaking!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Re: Super Soaker CPS 1200 Pump
Im not sure about the 1200, bt for the Max-D 3000, you have to open the whole gun.
DX wrote:In the neanderthal days of K-modding, people would lop off the whole PRV
Beware the PurpleWell, not that much soakage.
Re: Super Soaker CPS 1200 Pump
how do i get the nozzle cap off?
Keep Soaking!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Re: Super Soaker CPS 1200 Pump
It is probably glued, so get out your hobby knife and you flathead screwdrive. Cut and wedge, cut and wedge, repeat until unglued. Works like a charm.
DX wrote:In the neanderthal days of K-modding, people would lop off the whole PRV
Beware the PurpleWell, not that much soakage.
-
- Posts: 596
- Joined: Mon Jul 05, 2004 8:36 am
- Location: Connecticut
Re: Super Soaker CPS 1200 Pump
The nozzle cap on the 1200 is very hard to remove because of the large surface area that is glued. You will probably need to break away the entire orange piece towards the front. Don't worry, the 1200 is perfectly usable without the nozzle cap, and I actually prefer the way it looks.
Join the fight! Support water warfare in your area today!
Re: Super Soaker CPS 1200 Pump
i managed to do it by simply snapping it in lots of places. it worked great thanks to all!
Keep Soaking!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Re: Super Soaker CPS 1200 Pump
Enjoy your old and improved gun. It will now be easy to open for repairs later.
DX wrote:In the neanderthal days of K-modding, people would lop off the whole PRV
Beware the PurpleWell, not that much soakage.
Re: Super Soaker CPS 1200 Pump
thanks will do!
Keep Soaking!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Me_Soak_U
If you like water guns check out my youtube channel here:http://www.youtube.com/user/XxRnMproductionsxX
I'm That Guy With The 1700. Yeah the guy who drenched you? That's Me!
Who is online
Users browsing this forum: No registered users and 45 guests