Page 1 of 1

Posted: Mon May 29, 2006 8:30 am
by _roughstriker_
my flash flood broke yesterday and i took all the screws out but i cant get the ring off at the bottom of the pump,ive tried taking it off but nothing works... :oo:



Edited By _roughstriker_ on 1148909454

Posted: Mon May 29, 2006 9:00 am
by _roughstriker_
o well ill just chop it off

Posted: Mon May 29, 2006 9:08 am
by isoaker
This thread better fits in 'The Armoury' section.

As for taking off those orange 'pump caps', there are many methods, but no simple, easy, sure-fire method. Some pry it off using screwdrivers or a sharp knife. Others have used saws or vice-grips to wrench it off. I've found using screwdrivers together with lots of prying work best for me. Just beware of damaging the inner pump shaft when attempting to get the piece off.

:cool:

Posted: Mon May 29, 2006 11:47 am
by urbanfighter7
I just used a hacksaw and cut i off.But make sure to put it back on some how or the pump will come out. :cps1500::;):

Posted: Mon May 29, 2006 12:59 pm
by Stencil
When my FF broke i opened it up, removed the small nozzle, with a saw and sealed the hole up, so now i'm left with just the FF nozzle and CPS cylinder.

You are probley thinking "How'd you get the water in?"
Well, simply open the nozzle, shove the nose inside, let go of the "trigger", and hold the hose as hard as you can, until it's full.
OFFF! ( Quick fill Flash Flood!)

You only get one shot, but it's good as a 3rd arm.


:soakon2:

Ps: This idea is MINE, don't say YOU made it up.




Edited By Stencil on 1148929550

Posted: Mon May 29, 2006 2:18 pm
by Croc
If you read the article about taking apart a Max-D 6000, it is about the same, unless the thing is like my Hydroblades, which would then mean you have to saw it off. I would recommend trying the former of the two first though (just don't pull so hard that you break the plastic)

Posted: Fri Jun 02, 2006 8:29 pm
by LtDan64
Stencil wrote:You only get one shot, but it's good as a 3rd arm.


:soakon2:

Ps: This idea is MINE, don't say YOU made it up.


Noone's going to steal your idea, and if anyone here saw it stolen, we would let you know.




Edited By LtDan64 on 1149298276