WaterWar.net

thanks for the response ben. i ended up switching the hose out for a wider shorter vinyl hose and it seems to work just fine now. i will find a solar shower eventually and complete the build. however while i was testing the gun however something strange occured and i have zero explanation of how or ...

recently ive been in the final stages in my aph development with the hopes of making new projects going forward. however do to a busy schedule development of my aph has been stunted a bit. but recently i have put a hose on my aph. unfortunately it seems that the hose has kinda made it take an extree...

welcome to WWN, these look cool. I could be wrong here but I could see these as a wbl ammunition type, since you wouldn't have to worry about your ammo popping before hitting the target.

thanks for all the help in the project Ben. one thing i will recommend if you do make this pump is try to use rubber washers that are on the softer side, as for the ones i use have a risk of cracking i think. anyhow thanks for all the help, this project would not be possible without your feedback. a...

quick update Ive tested this pump on my APH and it worked 100% without leaking, i just had to tweak the design a little. all i did was add another rubber washer and tightened the hex nuts until i couldn't anymore and taped the threaded rod so it does not damage internals. i also have a more accurate...

hi Ben sorry i didn't reply sooner. Ive been busy with stuff and I have been busy actually making a prototype of this pump which i finished today. i found out that 1/4" threaded rod just as you suggested was perfect so i thank you for that. 1/4" nuts also don't interfere with 1/2" ID PVC pipe so tha...

what # O-ring would you recommend because the pipe would be 1/2" and the O-ring would have to be taller than the hex nuts holding it in place. I also fear that the hex nuts would not fit in the 1/2" pipe.

with fear

-Justice_Drencher

i just had an idea about how to make a metal rod pump without any special tools. here's the concept. the only downside i can see to this is the need for tape on the grip since the threaded rod would be quite uncomfortable to hold. anyways that's about it.

- with thought, Justice_drencher

Ok great! I do have a smaller nozzle that used to be 1/16" but after finding out that in this configuration its a glorified spray, ive resized it to 1/8" using scissors. i was going to do some testing today but the rain does not make range tests ideal. so ill update you when weather conditions are b...

Hi Ben i just updated the permissions in google drive like you said, i hope that fixes it. Just in case i will link them directly here. Thanks for the feedback as always -With passion ,Justice_Drencher https://drive.google.com/open?id=1hoDPJAZvTy0K1Hgm9CGfiPemDNuRxGtn&usp=drive_copy https://drive.go...

https://docs.google.com/document/d/1--1 ... it?tab=t.0

i think i found a way to post them let me know if it works

just made 2 videos of me shooting the gun with the 5/16" nozzle and the 1/2" Squall nozzle, i am not quite sure how to post them here but if you guys know how id like to know. i measured the range of my APH and i can say the 5/16" nozzle shoots 45 feet, im not sure if this is on par for a APH so id ...

Quick update I’ve fixed the issue turns out Teflon did the trick. Now I’m getting great range and power. The riot blast now is even more potent and I’ve made some nozzles that I would like to share.(note this is subject to change I will make more as time goes on.)

Thanks for responding Ben. Currently I have cemented and used the water gun and I have good and bad news. Now don’t worry nothing exploded and no one got hurt. The good news is the riot blast is very good and is on par with a flash flood riot blast. The bad news is that the main nozzle is sub par fo...

Recently building a APH, total cost in the high hundreds or low two hundreds. I could not find 3” sch 40 but I did find cellular core. There are a few differences however. I used only parts from Home Depot so that is something to consider. The pressure chambers thread since they didn’t have solvent ...

update made some 3d models of project A,J. hope you like them

(P.s sorry for double posting)

latex balloons probably are both of those things. however im going to test this out when project A,J is finished. i feel like LRT would be a matierial a little too good for someone like me to be using. as i said in the prior post if balloon bladder explodes i could easily replace or fix it. if i rui...

thank you for the information Ben. i will use this for evil. in all seriousness that is a great graph that you found. i guess that it was -6 degrees all along, should have trusted my gut instead. i should have said this before but the inspiration for the arctic jock all started when a couple of my a...

thanks for responding Z. i am currently planning on getting the parts for my APH. i dont know if this information would be useful for you guys but i plan on posting the total cost the APH once all parts are bought. getting back on topic i am leaning towards using elastic pressure for many reasons (s...

Thank you for responding Ben. I think that the ice would serve 2 purposes. 1 storage and 2 actually increasing laminar efficiency of the stream via cold water is denser than hot. The ice would melt with time refilling your reservoir as you play. Now the problem isn’t with the concept it’s with where...