Hello, suggestions for Chuck?

[Nemesis]

Hello everyone, i finally joined this forum after reading it for years, and i wanted to know if anyone had any suggestions of mods to do on "Chuck", my cps.... thing that started out as a 2100 that i integrated into an 1100, then k modded, then added a nozzle selector and back pack to. Anything is appreciated, i mostly just wanted to say hi to everyone. Also, if anyone could tell me exactly how to put a signature on my posts that would be greatly appreciated! Thanks! {[edit]figured out hoe to get a sig, sorry i have moments of stupidity sometimes}

[wetmonkey442]

Sounds like you've done most of the big modifications already. I would recommend a pump rod reinforcement and a paint job.

Welcome to the community!

[Nemesis]

Thank you! i will definitely reinforce the pump, and i also need to make a new pump handle out of pvc or something as the original one broke. paint job sounds like a great idea... but i should also paint my 2700 what with its bright colors and all.

[marauder]

Take some photos. I may have some parts you could use with the handle. What kind of range and shot time are you currently getting?

[Nemesis]

i might be a bit delayed with the photos, sorry. i am currently getting about 45 feet range, with about 4 secs shot time. will get more detailed results and hopefully pics soon. its quite cold where i live right now so i didn't feel like testing right now. {[edit] with a nozzle slightly larger than a cps 1000's}

[marauder]

Sweet. If you fight in the woods you could make a gillie cover. If you live in the northeast we have a lot of ppl who fight up there. CA99 lives in Michigan, and Soakinader lives in the Northwest. Just some things to consider if you are looking for people to battle with.

[TheSoaker]

You could take out the laminator walls in the nozzle and replace them with drinking straws

[Nemesis]

Sweet. If you fight in the woods you could make a gillie cover. If you live in the northeast we have a lot of ppl who fight up there. CA99 lives in Michigan, and Soakinader lives in the Northwest. Just some things to consider if you are looking for people to battle with.

wow ironic i live in kansas haha when i get older though i am planning on going to as many community wars as possible. my bro loves the idea of a gillie, so maybe i'll make one for him. i sorta like gillies, but i think i would like a paint job more. i do fight in the woods whenever i go to one of my friend's house, this friday, i soaked him good with my 1500 when he was up in a tree. thesoaker, does that improve lamination/range much?

[TheSoaker]

Yeah it does. I did it to my 1200 and it works great. also i replace it's nozzle with this: http://www.plumbersurplus.com/Prod/Gilm ... AID=198698

[Nemesis]

cool! perhaps i could do it on chuck and my 1200 too. with a small small k mod on the 1200 you could possibly have a very long range and hopefully quite laminar stream. we shall see how it works on chuck first. how much range do you get now?

[SEAL]

Welcome to WWn!

Chuck? Anyway, when you say 1100 do you mean 1000? Because then your blaster would be called a CPS 2110, going by the traditional naming method. How many balloons do you have on it? Sounds like you know what you're doing, that's for sure. It's great to have members like you.

[TheSoaker]

cool! perhaps i could do it on chuck and my 1200 too. with a small small k mod on the 1200 you could possibly have a very long range and hopefully quite laminar stream. we shall see how it works on chuck first. how much range do you get now?

My 1200 is getting around 49-50 feet cause its K modded also.

[Nemesis]

well i said 1100 because the first type of integration mod ever done was putting a 1000 pc into a 2100. i thought that the naming system put pc before host making that a 1021, but since the naming system was made after this mod because it was the first, the person who did it (i cant remember) called it an 1100. i beleive that name was kept because it was the first. (correct me if i'm wrong) so its a 1000 pc in a 2100 body with 30 balloons currently. Thanks for welcoming me and saying i know what i'm doing(a big overstatement) thesoaker, cool how many balloons are on your 1200?

[SEAL]

Oh? I hadn't heard that. If you have a 1000 PC in a 2100 body, then it's a 1021 (I thought you had a 2100 PC in a 1000 body, which would be a 2110). I've never heard anybody refer to one as an 1100 before. I have a 1021 as well; I brought it from another forum member. We measured 43 feet for it (I don't think there are any balloons on it).

[Nemesis]

well its on soaker media maybe look it up. i personally prefer 1021 to 1100 but i thought 1100 was used more, a 1021 it is though! i should be able to post some pics of it today, not of it firing though as it is 10 degrees outside! marauder wanted some pics of the pump area i think so they will be on there.

[TheSoaker]

well i said 1100 because the first type of integration mod ever done was putting a 1000 pc into a 2100. i thought that the naming system put pc before host making that a 1021, but since the naming system was made after this mod because it was the first, the person who did it (i cant remember) called it an 1100. i beleive that name was kept because it was the first. (correct me if i'm wrong) so its a 1000 pc in a 2100 body with 30 balloons currently. Thanks for welcoming me and saying i know what i'm doing(a big overstatement) thesoaker, cool how many balloons are on your 1200?

There's 25 pearlized balloons on the PC. Here I'll send you a shot pic sometime

[Nemesis]

Wow 50 feet! i cant wait to do this, my 1200 is at the post office, but it the post office isn't open, so i will get it tomorrow. how exactly do you attach that metal nozzle thing?

[TheSoaker]

What I did is just wrap the "barrel" in electrical tape and screw it on. It's perfectly watertight. I put the gun on YouTube the link is in my latest post on here.

[Nemesis]

sounds great, i'll hopefully do this soon. wow 50 feet i cant wait!