250ml/s output on an xp270? what?no joke!

For questions, articles, and discussions regarding water blaster modifications.
Post Reply
Monster_XXL
Posts: 8
Joined: Wed Mar 14, 2007 5:34 pm
Location: Ontario , Canada (guelph , aberfoyle)

Post by Monster_XXL » Sat Apr 21, 2007 11:39 am

Okay , so , I just recently did a mod to my XP-270s , where I drilled their nozzles. I won't mention what size drill bit i used , but i get 250ml/s output.... (precisely 253.7ml/s) (I calculated) And a range of about 20 feet , to the last puddle , for more details , contact me or ask for details on this board.

:angry:
ARMORY: XP-270 (x2 , 1 shotgunned) , Max-D 3000 (x2 , one shotgunned , don't ask) , Flash Flood (Max Infusion , screen removed) , Aquapack Devestator (broken) , Gremlin , Hornet , Firefly , Arctic Shock.


>>><<<Simply Monster_XXL!>>><<<

User avatar
isoaker
Posts: 7115
Joined: Sun Jul 04, 2004 1:51 pm
Location: Elsewhere
Contact:

Post by isoaker » Sat Apr 21, 2007 11:56 am

Details are always good! If you can post pics of the mod as well as some shot-pics, that'd be great!

:cool:
:: Leave NO one dry! :: iSoaker.com .:

User avatar
cobralex297
Posts: 496
Joined: Sun May 27, 2007 6:29 pm
Location: Massachusetts
Contact:

Post by cobralex297 » Mon Jun 04, 2007 12:23 pm

Don't mean to be redundant, but i completely second isoaker. I'm quite interested as i have an xp-270 sitting around, and i also have a drill and some bits sitting around...
how hard was it?
details..?

lol sorry to ramble tho. this is QUITE cool.

User avatar
cooldood31
Posts: 232
Joined: Mon Jul 05, 2004 9:02 am
Contact:

Post by cooldood31 » Mon Jun 04, 2007 1:52 pm

What really interests me is how you managed to get 250mL/s out of a soaker with a 200mL firing chamber (according to the stats here on isoaker).

Silence
Posts: 339
Joined: Sat Apr 21, 2007 3:01 pm
Location: Virginia

Post by Silence » Mon Jun 04, 2007 10:26 pm

There's less than one second of shot time. If there had been more capacity, then in one second, you could have displaced 250 mL. As it is, the shot time is only 200/250 = .8 seconds.

User avatar
cooldood31
Posts: 232
Joined: Mon Jul 05, 2004 9:02 am
Contact:

Post by cooldood31 » Tue Jun 05, 2007 4:18 pm

Still, effectively that means you're still getting only 200mLs out of the soaker at any given second, and with this mod there is still no way to cause 250mLs to leave the barrel in one second (unless your pump arm is like lightning). I understand the math behind what you are saying, but then what should be stated is:
a) it effectively gets 200mL/s; b) it shoots 200mLs in .8 seconds; or c) it could shoot 250mL/s if the shot-time lasted for a whole second.

As the shot-time was not stated, it is somewhat misleading, and in battle, effectively false.

SSCBen
Posts: 1616
Joined: Sun Jul 04, 2004 4:15 pm
Contact:

Post by SSCBen » Tue Jun 05, 2007 8:29 pm

There actually are two different types of water output. Instantaneous output and interval output. You people are using one second interval output. What truly determines water gun performance is instantaneous output due to the math (the output is the derivative of the water capacity). So it is not incorrect to state that there is a water output of 250 mL/s. However, over the entire interval of one second there is only 200 mL leaving the water, so it's pretty much as good as 200 mL/s. With that being said, the water gun probably would get 250 mL/s interval output if the PC capacity was 250 mL.

Silence
Posts: 339
Joined: Sat Apr 21, 2007 3:01 pm
Location: Virginia

Post by Silence » Wed Jun 06, 2007 2:10 pm

Good points. But the actual capacity is irrelevant when it comes to output. While output here is measured in seconds and the units are for seconds, instantaneous output is what you'll see.

Just because .8 isn't a whole number doesn't mean it's not a valid figure. You're not going to be shooting for exactly one second at a time. More output just means that you'll displace more output for whatever period of time you're firing.

Is a water gun with a 5L tank and 100 mL/s output more powerful than a water gun with a 200 mL tank and 250 mL/s output? No. While the water lasts, the second gun will displace more water.

User avatar
cobralex297
Posts: 496
Joined: Sun May 27, 2007 6:29 pm
Location: Massachusetts
Contact:

Post by cobralex297 » Wed Jun 06, 2007 7:09 pm

in response to cooldood

ml/s is a ratio, it makes no difference what the actual shot time is, it is the rate of water put out over time. the fact that there isn't a shot time of over a second makes no difference. simple.

Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests