For questions, articles, and discussions regarding water blaster modifications.
-
urbanfighter7
- Posts: 82
- Joined: Sun May 21, 2006 3:35 pm
- Location: Santa Cruz CA.
-
Contact:
Post
by urbanfighter7 » Tue May 23, 2006 6:36 pm
Today I took my Blazer, and I cut the fan nozzle off about half an inch. Pumped to maximum pressure,it shot a blast about 3/4 of an inch thick ten feet! it chewed trough ammo VERY quickly, but its great for close range drenching :;):
My Armory:
CPS 1000
CPS 1500
CPS 2500
Douchenator
APH!
-
Stencil
- Posts: 119
- Joined: Sat May 20, 2006 4:02 pm
- Location: UK
Post
by Stencil » Thu May 25, 2006 2:39 pm
Shot time?
-
SharpObjects
- Posts: 176
- Joined: Fri Apr 29, 2005 8:17 pm
- Location: Look in your food.
Post
by SharpObjects » Fri May 26, 2006 2:52 pm
Can't be much more then a second. It's almost similar to the FF blast.
CPS 1000 (Now K-modded into a CPS 10000)
CPS 4100 *in repair*
MI Flash Flood w/Aqua Pak
SC Big Trouble
Blazer
Xenon
Splat Blast
STE Arctic Shock
Vaporizer
Max-D 3000
-
urbanfighter7
- Posts: 82
- Joined: Sun May 21, 2006 3:35 pm
- Location: Santa Cruz CA.
-
Contact:
Post
by urbanfighter7 » Sat May 27, 2006 12:16 am
Yeah not a long shot time. But good soakage :bm1000:
Edited By urbanfighter7 on 1148707023
My Armory:
CPS 1000
CPS 1500
CPS 2500
Douchenator
APH!
-
Stencil
- Posts: 119
- Joined: Sat May 20, 2006 4:02 pm
- Location: UK
Post
by Stencil » Sat May 27, 2006 3:04 am
I just ordered a Blazer (2005) off the internet.
Gonna do that mod straight away.
-
urbanfighter7
- Posts: 82
- Joined: Sun May 21, 2006 3:35 pm
- Location: Santa Cruz CA.
-
Contact:
Post
by urbanfighter7 » Sat May 27, 2006 10:13 am
Good to see someone try this mod. Make sure you put the selctor right on the barrle of the gun. Because somtimes it comes out flater.
Edited By urbanfighter7 on 1149140519
My Armory:
CPS 1000
CPS 1500
CPS 2500
Douchenator
APH!
Users browsing this forum: No registered users and 33 guests