CPS 1000 Firing Valve
Posted: Tue Sep 27, 2016 9:17 am
Danny's 1000 started pump shooting. He opened it up last night and we determined the problem was inside the valve, probably a rubber gasket being loose. It wasn't an issue with the plastic lever on the firing pin being pulled back as it was in a normal spot and the trigger and firing pin return to normal placement after you pull the trigger.
I've opened up 2000 and 1500 firing valves, but those have screws. What's the best method of opening up a glued firing valve? I have a heat gun, but I'm wondering if that wouldn't be overkill. Has anyone used boiling water to melt the glue? I used that successfully on some glued parts in my Aquapak Devastators.
I've opened up 2000 and 1500 firing valves, but those have screws. What's the best method of opening up a glued firing valve? I have a heat gun, but I'm wondering if that wouldn't be overkill. Has anyone used boiling water to melt the glue? I used that successfully on some glued parts in my Aquapak Devastators.