fixing a broken 1500
Re: fixing a broken 1500
good, hopefully he can get it working for you.
-
- Posts: 23
- Joined: Sat Aug 20, 2016 3:30 am
- Location: uk
Re: fixing a broken 1500
I still have the other 1500 that needs attention.
-
- Posts: 23
- Joined: Sat Aug 20, 2016 3:30 am
- Location: uk
Re: fixing a broken 1500
got a reply from the repair guy.
"I've had a look at the soaker for you. The main leak is coming from the mechanism in the photos, the part that pulls back and opens the valve to let the water out. There's a orange rubber piece on the stem which I think acts as a stop, to prevent damage to the reservoir from people pulling tight in the trigger, that said, the damage is likely due to the metal rod wearing away the plastic tube."
I have included the photos he took. Can the orange bit be fixed/replaced? The really concerning thing is that the other 1500 leaks from the nozzle as well but it still fires where as this one doesn't. I hope I am not doomed to forever recieve broken soakers.
"I've had a look at the soaker for you. The main leak is coming from the mechanism in the photos, the part that pulls back and opens the valve to let the water out. There's a orange rubber piece on the stem which I think acts as a stop, to prevent damage to the reservoir from people pulling tight in the trigger, that said, the damage is likely due to the metal rod wearing away the plastic tube."
I have included the photos he took. Can the orange bit be fixed/replaced? The really concerning thing is that the other 1500 leaks from the nozzle as well but it still fires where as this one doesn't. I hope I am not doomed to forever recieve broken soakers.
- Attachments
-
- DSC_0660.JPG (99.01 KiB) Viewed 10121 times
-
- DSC_0659.JPG (221.32 KiB) Viewed 10121 times
-
- Posts: 815
- Joined: Thu Jul 12, 2012 2:10 pm
- Location: Surrey, BC, Canada
Re: fixing a broken 1500
Just thought I would point you at this post:
http://waterwar.net/forum/viewtopic.php ... 335#p61335
Unfortunately I have either lost the pictures and/or the original repair thread for my CPS 1500, you're going to need some machinist's tools (Tap + drill press at the very least) to make a new hole in the firing pin. Plus a cauter pin, and a new o ring to replace the old worn out one - and no more leak!
It is a bit of a pain but I have done it twice and I still have both CPS 1500's in working order.
Oh, and once on a CPS 2500 as well. Forgot about that one:
Good luck: https://www.flickr.com/photos/151868511 ... 488529360/
http://waterwar.net/forum/viewtopic.php ... 335#p61335
Unfortunately I have either lost the pictures and/or the original repair thread for my CPS 1500, you're going to need some machinist's tools (Tap + drill press at the very least) to make a new hole in the firing pin. Plus a cauter pin, and a new o ring to replace the old worn out one - and no more leak!
It is a bit of a pain but I have done it twice and I still have both CPS 1500's in working order.
Oh, and once on a CPS 2500 as well. Forgot about that one:
Good luck: https://www.flickr.com/photos/151868511 ... 488529360/
My friends call me Nader. My foes just run.
Photos relocated to: https://www.flickr.com/photos/151868511 ... 8741427445
I find 'em, I fix 'em.
Photos relocated to: https://www.flickr.com/photos/151868511 ... 8741427445
I find 'em, I fix 'em.
-
- Posts: 23
- Joined: Sat Aug 20, 2016 3:30 am
- Location: uk
Re: fixing a broken 1500
did you remove the firing pin? I thought that doing so would permernatly disable the soaker beyond fixing!
-
- Posts: 815
- Joined: Thu Jul 12, 2012 2:10 pm
- Location: Surrey, BC, Canada
Re: fixing a broken 1500
Yes, I removed the firing pin. I cut/ground off the end of the pin to remove the whole assembly through the firing chamber. That's why I had to drill a hole and insert a cauter pin in the end (that's the little hairclip looking thing at the end holding the whole thing together).
Every single super soaker I fixed this way had the same problem- that tiny, tiny little o ring inside wore out and with the seal blown, the gun leaked like crazy out of the firing chamber. Replace the o ring and lubricate, gun works like brand new. The real problem is that there is no way to replace the o ring without removing the firing pin. I came up with a solution to that problem. Cost me a few nickels worth of parts out of a large box of assorted size o rings and another box of cauter pins (thank you princess auto!)
You can see the tiny little black o ring in this photo.
OK I'm going back to homework now.
Every single super soaker I fixed this way had the same problem- that tiny, tiny little o ring inside wore out and with the seal blown, the gun leaked like crazy out of the firing chamber. Replace the o ring and lubricate, gun works like brand new. The real problem is that there is no way to replace the o ring without removing the firing pin. I came up with a solution to that problem. Cost me a few nickels worth of parts out of a large box of assorted size o rings and another box of cauter pins (thank you princess auto!)
You can see the tiny little black o ring in this photo.
OK I'm going back to homework now.
My friends call me Nader. My foes just run.
Photos relocated to: https://www.flickr.com/photos/151868511 ... 8741427445
I find 'em, I fix 'em.
Photos relocated to: https://www.flickr.com/photos/151868511 ... 8741427445
I find 'em, I fix 'em.
-
- Posts: 3975
- Joined: Tue Jul 20, 2004 9:29 pm
- Location: Charleston
- WWN League Team: Havoc
- Contact:
Re: fixing a broken 1500
That is an awesome fix. I may need to do this to my 2000 which is pump shooting. The firing valve won't seal all the way I guess.
https://hydrowar.wordpress.com/
SEAL wrote:If you ain't bloody and muddy by the end of the day, you went to a Nerf war.
Re: fixing a broken 1500
Yeah that is the O-ring i referred to in my 1st post in this thread, seem Its a massive pain to get to. @soakinader - great fix!
-
- Posts: 815
- Joined: Thu Jul 12, 2012 2:10 pm
- Location: Surrey, BC, Canada
Re: fixing a broken 1500
You have probably seen the other thread but I'm posting this here anyways:
https://flic.kr/s/aHsm8gFCz4
This is the firing valve repair on good ol' CPS 1500 number 2. Or maybe it is number 3? It's the second repair I've done like this on a 1500, anyways.
https://flic.kr/s/aHsm8gFCz4
This is the firing valve repair on good ol' CPS 1500 number 2. Or maybe it is number 3? It's the second repair I've done like this on a 1500, anyways.
My friends call me Nader. My foes just run.
Photos relocated to: https://www.flickr.com/photos/151868511 ... 8741427445
I find 'em, I fix 'em.
Photos relocated to: https://www.flickr.com/photos/151868511 ... 8741427445
I find 'em, I fix 'em.
-
- Posts: 23
- Joined: Sat Aug 20, 2016 3:30 am
- Location: uk
Re: fixing a broken 1500
Repairs have not gone well. I followed the picture guide but it didn't work. When I pulled the trigger the pin slid back and then stayed there. When I removed the pin, two parts flew of and went missing. amely the metal washer that locks everything in place.
Today I got it out to try again only to accidentaly step on it.The tube the plunger sits in is snapped in half as is the hinge bit on the fireing pin.
If ANYONE can fix this then let me know. I will ship ANYWHERE in the world just to get it fixed.
Yes. I am serious about this.
Please helop as my sanity is at stake.
Today I got it out to try again only to accidentaly step on it.The tube the plunger sits in is snapped in half as is the hinge bit on the fireing pin.
If ANYONE can fix this then let me know. I will ship ANYWHERE in the world just to get it fixed.
Yes. I am serious about this.
Please helop as my sanity is at stake.
Re: fixing a broken 1500
icecrystal,
"I will ship ANYWHERE in the world just to get it fixed." - It may be cheaper to just purchase the one below and keep your current one for parts...
https://www.ebay.co.uk/itm/Super-soaker ... 035395802?
Just a thought, not trying to discourage you.
"I will ship ANYWHERE in the world just to get it fixed." - It may be cheaper to just purchase the one below and keep your current one for parts...
https://www.ebay.co.uk/itm/Super-soaker ... 035395802?
Just a thought, not trying to discourage you.
-
- Posts: 23
- Joined: Sat Aug 20, 2016 3:30 am
- Location: uk
Re: fixing a broken 1500
Iv'e already bought too others that where describes as 'working perfectly'
Besides, the thought of not being able to repair such a fantastic gun especially when so many have said I cant do it. is just not thinkable right now.
Besides, the thought of not being able to repair such a fantastic gun especially when so many have said I cant do it. is just not thinkable right now.
-
- Posts: 815
- Joined: Thu Jul 12, 2012 2:10 pm
- Location: Surrey, BC, Canada
Re: fixing a broken 1500
Hey there,
I think that soaker that Tim listed is one of the cleanest- looking and well-detailed description for a super soaker you can find on Ebay. There's no contact marks, scrapes or fading that I can see. Compare the color of the tank on the inside of yours with that one and you'll see what I mean. I would recommend you bid on that for what it would cost to ship your broken 1500 back and forth (or to hire someone to fix it for you) and enjoy that instead. I would guess it's worth about 75-100 USD (or 60-80 Euro) and you can likely buy it for (much) less than that.
There is no way that it is worth that much money to fix it. No way.
You can still try and fix the ones you have. However, if you want to try and fix it, you are going to need to post way more, higher quality pictures, and you also need some patience, tools, and technical skill. I'm sorry that you stepped on your super soaker mate but if you keep breaking things and don't start fixing things then the whole 1500 is destined for a dumpster or spare parts. I'm also worried because in your photos it looks like you attacked some of the parts that shouldn't be glued with a whole lot of glue (or it that teflon tape? If it's tape, then never mind me!) .
There are lots of people on here like me who can try and help if you know how to ask the right questions. Good luck.
I think that soaker that Tim listed is one of the cleanest- looking and well-detailed description for a super soaker you can find on Ebay. There's no contact marks, scrapes or fading that I can see. Compare the color of the tank on the inside of yours with that one and you'll see what I mean. I would recommend you bid on that for what it would cost to ship your broken 1500 back and forth (or to hire someone to fix it for you) and enjoy that instead. I would guess it's worth about 75-100 USD (or 60-80 Euro) and you can likely buy it for (much) less than that.
There is no way that it is worth that much money to fix it. No way.
You can still try and fix the ones you have. However, if you want to try and fix it, you are going to need to post way more, higher quality pictures, and you also need some patience, tools, and technical skill. I'm sorry that you stepped on your super soaker mate but if you keep breaking things and don't start fixing things then the whole 1500 is destined for a dumpster or spare parts. I'm also worried because in your photos it looks like you attacked some of the parts that shouldn't be glued with a whole lot of glue (or it that teflon tape? If it's tape, then never mind me!) .
There are lots of people on here like me who can try and help if you know how to ask the right questions. Good luck.
My friends call me Nader. My foes just run.
Photos relocated to: https://www.flickr.com/photos/151868511 ... 8741427445
I find 'em, I fix 'em.
Photos relocated to: https://www.flickr.com/photos/151868511 ... 8741427445
I find 'em, I fix 'em.
-
- Posts: 23
- Joined: Sat Aug 20, 2016 3:30 am
- Location: uk
Re: fixing a broken 1500
I hadn't glued anything before the photos where taken.
Both my other soakers look mint but neither one will fire properly. air's getting in somewhere but I can't find the leak.
Both my other soakers look mint but neither one will fire properly. air's getting in somewhere but I can't find the leak.
-
- Posts: 23
- Joined: Sat Aug 20, 2016 3:30 am
- Location: uk
Re: fixing a broken 1500
I got outbid.
Who is online
Users browsing this forum: No registered users and 31 guests