Super Soaker 50 Joint

For questions, articles and discussions regarding water blaster maintenance and repairs.
Posts: 1
Joined: Fri Jul 08, 2016 9:42 am

Super Soaker 50 Joint

Postby virtualet » Fri Jul 08, 2016 9:49 am


I have an old school SS 50 and after opening up the gun, there is a broken joint that's between the pump action and the opening into the reservoir. I assume simply super glueing this together won't suffice so wanted to see what my options were to make this thing work again. Any thoughts?
IMG_20160708_104446 copy.jpg
IMG_20160708_104446 copy.jpg (371.81 KiB) Viewed 262 times

User avatar
Posts: 325
Joined: Sat Nov 26, 2011 6:10 pm
Location: LV426 (as you humans call it)

Re: Super Soaker 50 Joint

Postby TheSoaker » Fri Jul 08, 2016 11:08 am

You could try some epoxy putty. That should do it.
super soaker cps 2000......SUPER SOAKER CPS 2000!!!!!!!!!1!!!1!!one

User avatar
Posts: 2407
Joined: Thu Apr 29, 2010 11:37 am
Location: Charlotte, NC
WWN League Team: Catskill Mountain SEALs

Re: Super Soaker 50 Joint

Postby SEAL » Fri Jul 08, 2016 1:18 pm

Hi, welcome to the board. I use something called JB Water Weld for stuff like this. It's a kind of epoxy putty, like TheSoaker mentioned. It's very strong and it holds pressure. Just don't put too much on or else the casing won't go together properly.

Return to “Maintenance & Repairs”

Who is online

Users browsing this forum: No registered users and 1 guest