My CPS 1700 leaks from the pump badly when pumping. I checked the pump end but it looked normal. I found at isoaker.com that lubricating the rod could be an idea, so I tried that with a silicone grease but it didn't make any difference.
Now, I found the black o-ring at the bottom of the pump tube (sorry for the bad picture), and thinking that replacing this o-ring might be a solution.
Has anyone done this before, or come up with any other possibilities? Please let me know.
Thank you.
CPS 1700 leaks from the pump
CPS 1700 leaks from the pump
- Attachments
-
- image.jpg (92.38 KiB) Viewed 6428 times
-
- image.jpg (833.05 KiB) Viewed 6428 times
-
- image.jpg (942.91 KiB) Viewed 6428 times
Re: CPS 1700 leaks from the pump
Thank you, I will try.
Re: CPS 1700 leaks from the pump
Jayblazer, I read about your repair, thank you very much. I haven't tried that yet, but in your last pick, you just put a o-ring in it, or both a vinyl tube and o-ring? Please let me know. It seems the pump of 2700 is very similar to that of 1700 so I believe I can do exactly the same way as you to fix it. Thank you.
Re: CPS 1700 leaks from the pump
I just used an o-ring
Who is online
Users browsing this forum: No registered users and 44 guests