CPS 1700 leaks from the pump

For questions, articles and discussions regarding water blaster maintenance and repairs.
hmkobe
Posts: 27
Joined: Wed Jul 08, 2015 9:49 pm
Location: Japan

CPS 1700 leaks from the pump

Postby hmkobe » Sat Jul 25, 2015 8:56 pm

My CPS 1700 leaks from the pump badly when pumping. I checked the pump end but it looked normal. I found at isoaker.com that lubricating the rod could be an idea, so I tried that with a silicone grease but it didn't make any difference.
Now, I found the black o-ring at the bottom of the pump tube (sorry for the bad picture), and thinking that replacing this o-ring might be a solution.
Has anyone done this before, or come up with any other possibilities? Please let me know.
Thank you.
Attachments
image.jpg
image.jpg (92.38 KiB) Viewed 273 times
image.jpg
image.jpg (833.05 KiB) Viewed 273 times
image.jpg
image.jpg (942.91 KiB) Viewed 273 times

jayblazer
Posts: 47
Joined: Sun May 31, 2015 9:53 am

Re: CPS 1700 leaks from the pump

Postby jayblazer » Sun Jul 26, 2015 6:24 pm


hmkobe
Posts: 27
Joined: Wed Jul 08, 2015 9:49 pm
Location: Japan

Re: CPS 1700 leaks from the pump

Postby hmkobe » Mon Jul 27, 2015 1:00 am

Thank you, I will try.

hmkobe
Posts: 27
Joined: Wed Jul 08, 2015 9:49 pm
Location: Japan

Re: CPS 1700 leaks from the pump

Postby hmkobe » Wed Jul 29, 2015 12:44 am

Jayblazer, I read about your repair, thank you very much. I haven't tried that yet, but in your last pick, you just put a o-ring in it, or both a vinyl tube and o-ring? Please let me know. It seems the pump of 2700 is very similar to that of 1700 so I believe I can do exactly the same way as you to fix it. Thank you.

jayblazer
Posts: 47
Joined: Sun May 31, 2015 9:53 am

Re: CPS 1700 leaks from the pump

Postby jayblazer » Sun Aug 02, 2015 1:48 pm

I just used an o-ring


Return to “Maintenance & Repairs”

Who is online

Users browsing this forum: No registered users and 2 guests

cron