Opening a CPS 1000
Posted: Sat Jun 13, 2015 2:15 pm
I have searched and searched and have found nothing specifically on this blaster that pertains to my issue... I have 3 CPS 1000's, 2 of which need to be opened to be repaired. I have unscrewed all the screws and the nozzle cap came off with ease, now im at a point where the orange pump cap is holding the gun together, and i cannot for the life of me get it off.
Im assuming it is glued on, but i noticed on the super shooter 2000 (a knockoff 1000) that the pump cap is screwed on. Frankly, im just confused as to how to safely proceed with removing the cap without breaking the gun. I have taken a razor blade and got inbetween the body and the cap, even still wile trying to pry it off using a thin flathead it just slips out and it wont budge, ive tried twisting it with no luck as well with all my strength again it didnt budge even a mm.
If anybody has experience opening the CPS 1000 specifically any help would be greatly appreciated, i feel i am on the right track but ive put as much force on this cap aas i feel comfortable with not knowing exactly how to remove it. Thank you!
Im assuming it is glued on, but i noticed on the super shooter 2000 (a knockoff 1000) that the pump cap is screwed on. Frankly, im just confused as to how to safely proceed with removing the cap without breaking the gun. I have taken a razor blade and got inbetween the body and the cap, even still wile trying to pry it off using a thin flathead it just slips out and it wont budge, ive tried twisting it with no luck as well with all my strength again it didnt budge even a mm.
If anybody has experience opening the CPS 1000 specifically any help would be greatly appreciated, i feel i am on the right track but ive put as much force on this cap aas i feel comfortable with not knowing exactly how to remove it. Thank you!