XP 150 nozzle o ring replacement

[soakinader]

Anyone know what size the o ring behind the screw-off nozzle on an xp 150 is? I can't get the o ring out of my second XP 150 for comparison (go figure) and I can only guesstimate the size. All I know is that it is thin and I don't have one that size.

Also, I noticed that my XP 65 and 110 both have the exact same nozzle. The 110 is glued on, but the 65 comes off and can shoot a large burst about ten feet angled (much worse than the 150). So you might be better off just unscrewing the reservoir and swinging it at your opponent XP.

[marauder]

I don't know the size of the o ring behind the 150 nozzle. I can probably let you know when I get home. I'm getting a digital caliper so that I can measure things like this (and nozzle sizes) accurately. CA99 is putting together a list of important parts sizes, he might be able to help you.

This is a sick picture I took of the 65's riot blast that you're talking about. I was actually quite impressed with it.


http://hydrowar.com/xp65.html

[Andrew]

If you took it to a hardware shop they should be able to find a close replacment.

[soakinader]

That picture made me smile. Yeah, I like the XP 65. I like the design, and it works well. Does your pump rotate freely? Mine does.