Aqua Flash Super Soaker Concept Ideas
Posted: Wed Feb 06, 2008 12:13 pm
Despite the fact my contest ended up getting called off due to lack of entries, the idea of the contest made me want to do some of my own ideas, and I feel I need to do some creativity as I lack that at the moment/or struggling with it.
I don't really have a proper design program yet, and I don't really want to use paint either, so at present my realisitc ideas are being done by good ol' fashioned hand drawing.
I've done a rough draft of my first idea, so here goes (please excuse my crappy art skillz'). I will be drawing a better one than that is fully labelled, coloured with description, all the usual good old Larami Super Soaker stuff, as this is only rough for now, I also need to buy a smaller fine liner. I also need to make the front look a bit better around the nozzle area.
I was debating on whether I should call it the CPS 1212 or 1512, at present, it is 1512.
Basically, this gun has two nozzles and picks up from the great standard that the CPS 1500 offered (hence the CPS 1512). The bottom and top nozzle can be fired alone, or both can be fired at once by toggling the gauge switch next to the end of the reservoir. The bottom nozzle is rated at 5x and the top is rated at 10x (could change). Has a 3.5L reservoir and a 1L spherical CPS firing chamber. The reservoir cap is also backpack compatible (backpacks sold separately). Tracked pump for great durability. Also has a comfy thick padded shoulder strap (not pictured) for the ultimate soaking experience.
I was considering 1212 because of the nozzles, you can either fire one nozzle or both, hence 1212.
I'll be working on this more, as well as other ideas when I'm finished with fully doing this one at the moment. While at present there is not much chance of powerful soakers being released I can at least create my own realistic imaginery (at the moment) line of Super Soakers which would be good. I'll use this thread to update my ideas through time.
I don't really have a proper design program yet, and I don't really want to use paint either, so at present my realisitc ideas are being done by good ol' fashioned hand drawing.
I've done a rough draft of my first idea, so here goes (please excuse my crappy art skillz'). I will be drawing a better one than that is fully labelled, coloured with description, all the usual good old Larami Super Soaker stuff, as this is only rough for now, I also need to buy a smaller fine liner. I also need to make the front look a bit better around the nozzle area.
I was debating on whether I should call it the CPS 1212 or 1512, at present, it is 1512.
Basically, this gun has two nozzles and picks up from the great standard that the CPS 1500 offered (hence the CPS 1512). The bottom and top nozzle can be fired alone, or both can be fired at once by toggling the gauge switch next to the end of the reservoir. The bottom nozzle is rated at 5x and the top is rated at 10x (could change). Has a 3.5L reservoir and a 1L spherical CPS firing chamber. The reservoir cap is also backpack compatible (backpacks sold separately). Tracked pump for great durability. Also has a comfy thick padded shoulder strap (not pictured) for the ultimate soaking experience.
I was considering 1212 because of the nozzles, you can either fire one nozzle or both, hence 1212.
I'll be working on this more, as well as other ideas when I'm finished with fully doing this one at the moment. While at present there is not much chance of powerful soakers being released I can at least create my own realistic imaginery (at the moment) line of Super Soakers which would be good. I'll use this thread to update my ideas through time.